• views: 160
• date: 27 August 2026
• posted by: voska89

What you'll learn

Explain what weld defects are and how they differ from acceptable weld imperfections.
Identify where weld defects occur and describe their basic shape, size, orientation, and distribution.
Recognize common weld defect types and explain how they form.
Analyze how materials, fit-up, contamination, hydrogen, heat, shielding, and welding practices can cause defects.
Apply practical controls used to prevent weld defects during preparation and welding.
Explain how VT, PT, MT, RT, and UT are used to detect and examine weld defects.
Select a suitable inspection method based on the weld, material, defect type, access, and inspection needs.
Interpret inspection indications and distinguish real defects from nonrelevant or false indications.
Assess defect significance using size, location, material, loading, service conditions, and acceptance criteria.
Explain how weld defects are documented, accepted, repaired, re-inspected, or rejected.
Analyze defect evidence and records to identify likely root causes and corrective actions.
Describe how weld-related failures are investigated, evaluated, and reported.

Requirements

No advanced qualifications, certifications, or specialist experience are required to take this course. Learners should have a basic understanding of engineering, manufacturing, industrial, or related technical concepts, sufficient proficiency in English to follow technical terminology, and a strong interest in welding and weld quality. Previous academic, technical, or practical experience in welding, fabrication, inspection, materials, or a related field may be helpful, but it is not essential.

Description

"This course contains the use of artificial intelligence."
Understanding weld defects is essential for producing safe, reliable, and high-quality welded structures. In engineering and industrial work, a detected condition should not be judged only by its appearance or location. It must be correctly identified, described, measured, and evaluated against applicablewelding codes, standards, and acceptance requirements. Strong knowledge in this area supports better welding quality, reduces repeated problems, and helps protect structural integrity and service performance.
The course follows a clear progression from basic understanding to professional decision-making. It begins with the terms, locations, forms, and classifications needed to describe weld conditions correctly, then develops an understanding of common defect types and the factors that cause them. From there, it moves intoprevention and process control, followed byinspection and evaluation, including interpretation, sizing, severity, code requirements, acceptance, and documentation. The final stage covers defect management, repair, post-repair verification, root-cause analysis, corrective action, and failure investigation.
In real engineering work, effective defect assessment requires more than simply finding an indication. Its type, size, location, orientation, extent, and possible effect on the welded component must be understood. The condition must also be considered in relation to the material, service conditions, inspection results, and governing requirements before deciding whether it can be accepted, requires further assessment, or needs repair. This helps reduce unnecessary repairs, missed risks, repeated defects, and poorly supported decisions.
A strong understanding ofweld defect identification, prevention and control, inspection and evaluation, code-based acceptance, repair and corrective action, and failure investigation improves technical judgment throughout fabrication, inspection, maintenance, repair, and service. It also supports clearer documentation, better communication between welding and inspection teams, stronger problem solving, and more consistent decisions based on technical evidence rather than assumption.
Each lecture includes dedicatedstudy materialand aninfographic summary. Learners should review thestudy material after watching the lecture to strengthen their understanding, and use theinfographic summary for quick revision and easy recall of key concepts whenever needed.

Who this course is for

Students, graduates, and early-career professionals in engineering or technical fields who want a solid foundation for working with welded components and weld quality.
Engineers and technical professionals in welding, fabrication, manufacturing, materials, or quality roles who work with weld integrity in design or production.
Professionals in inspection, maintenance, reliability, operations, or asset management who need to understand weld condition, acceptance, repair, and service implications.
Professionals in industries that rely on welded structures, piping, equipment, or fabricated components where weld quality and integrity are important.

Homepage

https://www.udemy.com/course/weld-defects/

   
   
   

Forex Trading

Crypto Trading. 20 USD Bonus after KYC

We need your support!
Make a donation to help us stay online
        
Bitcoin (BTC)
bc1q08g9d22cxkawsjlf8etuek2pc9n2a3hs4cdrld
	
Bitcoin Cash (BCH)
qqvwexzhvgauxq2apgc4j0ewvcak6hh6lsnzmvtkem

Ethereum (ETH)
0xb55513D2c91A6e3c497621644ec99e206CDaf239

Litecoin (LTC)
ltc1qt6g2trfv9tjs4qj68sqc4uf0ukvc9jpnsyt59u

USDT (ERC20)
0xb55513D2c91A6e3c497621644ec99e206CDaf239

USDT (TRC20)
TYdPNrz7v1P9riWBWZ317oBgJueheGjATm

0 1 2 3 4 5

| Print version |

	Information
		Users of GUESTS are not allowed to comment this publication.