• views: 573
• date: 31 July 2026
• posted by: 0nelove

Plc Programming: Ladder Logic For Beginners
Published 7/2026
Created by Riad Almadani • 70,000+ Students
MP4 | Video: h264, 1920x1080 | Audio: AAC, 44.1 KHz, 2 Ch
Level: Beginner | Genre: eLearning | Language: English | Duration: 44 Lectures ( 2h 18m ) | Size: 824.9 MB
Learn PLC ladder logic, timers, counters and state machines through hands-on projects using simulators and Claude AI.
What you'll learn
⚡ Explain how PLCs, inputs, outputs and the PLC scan cycle work in industrial automation.
⚡ Read, create and simulate PLC ladder logic using contacts, coils, rungs, tags and free PLC tools.
⚡ Translate machine requirements into AND, OR, XOR and NOT logic using NO and NC contacts.
⚡ Build motor Start/Stop circuits using seal-in latches, Set/Reset instructions and one-shots.
⚡ Configure TON, TOF and RTO timers and CTU, CTD and CTUD counters for automation tasks.
⚡ Use comparison, range-check, math and MOVE instructions to process numerical PLC data.
⚡ Design traffic lights and machine sequences using finite state machines and state transitions.
⚡ Build and test an automatic bottle-filling station using timers, counters, states and outputs.
⚡ Use Claude AI to draft I/O lists, explain ladder logic and assist with PLC debugging responsibly.
⚡ Test PLC programs, identify common ladder logic errors and verify safe operation in simulation.
Requirements
❗ No previous PLC programming, ladder logic or industrial automation experience is required.
❗ A computer with internet access and a modern web browser is required for the free PLC simulator
❗ No physical PLC, electrical equipment or paid industrial software is required.
❗ Basic computer skills and a willingness to complete the hands-on exercises are recommended.
Description
LearnPLC programming and ladder logic from scratch in approximately three hours—without buying expensive PLC hardware or industrial software.
This beginner-friendly course takes you from understanding what a Programmable Logic Controller is to planning, building, simulating, and testing a complete automatic bottle-filling system.
You will begin with the foundations of industrial automation: PLC inputs and outputs, the scan cycle, ladder diagrams, rungs, contacts, coils, bits, tags, and addresses. You will then build your first working ladder logic program using a free PLC simulator.
Step by step, you will learn how to
✨ Read and write PLC ladder logic
✨ Use Normally Open and Normally Closed contacts
✨ Build AND, OR, XOR, and NOT logic
✨ Create motor Start/Stop and seal-in circuits
✨ Use standard coils and Set/Reset instructions
✨ Detect rising and falling edges with one-shots
✨ Avoid duplicate output and double-coil problems
✨ Control processes with TON, TOF, and retentive timers
✨ Count products using CTU, CTD, and CTUD counters
✨ Use comparisons, range checks, math, and MOVE instructions
✨ Organize sequences with finite state machines
✨ Create clear PLC I/O lists and state diagrams
✨ Use Claude AI to draft, explain, and debug PLC logic responsibly
You will reinforce these skills through practical exercises, including a motor Start/Stop circuit, blinking oscillator, conveyor product counter, tank-level alarm, and traffic-light state machine.
For the final project, you will build anautomatic bottle-filling station. The PLC program detects a bottle, fills it, allows the liquid to settle, applies a cap, ejects the finished bottle, and counts production until a complete batch is reached.
The course uses free tools such asPLC Fiddle and OpenPLC, allowing you to practice PLC programming on a normal computer without physical hardware. The concepts you learn are transferable to major industrial platforms such as Siemens TIA Portal and Rockwell Studio 5000, although their software and instruction names may differ.
You will also discover how an AI assistant can help create I/O lists, draft ladder logic, explain instructions, and diagnose programming problems. More importantly, you will learn the professional rule behind AI-assisted automation: understand every rung, simulate every program, test edge cases, and never treat AI-generated logic as a substitute for safety engineering.
Who this course is for
⭐ Complete beginners who want a fast, practical introduction to PLC programming and ladder logic.
⭐ Electrical, electronic, mechatronics, control and automation engineering students.
⭐ Electricians and maintenance technicians who want to understand PLC-controlled machines.
⭐ Junior automation engineers preparing to study Siemens, Rockwell or other industrial PLC platforms.
⭐ Programmers and makers interested in industrial automation, machine sequencing and PLC simulation.
⭐ Learners who want to use AI responsibly to plan, explain and debug beginner PLC projects.
Homepage

https://www.udemy.com/course/plc-programming-ladder-logic-for-beginners

   
   
   

Forex Trading

Crypto Trading. 20 USD Bonus after KYC

We need your support!
Make a donation to help us stay online
        
Bitcoin (BTC)
bc1q08g9d22cxkawsjlf8etuek2pc9n2a3hs4cdrld
	
Bitcoin Cash (BCH)
qqvwexzhvgauxq2apgc4j0ewvcak6hh6lsnzmvtkem

Ethereum (ETH)
0xb55513D2c91A6e3c497621644ec99e206CDaf239

Litecoin (LTC)
ltc1qt6g2trfv9tjs4qj68sqc4uf0ukvc9jpnsyt59u

USDT (ERC20)
0xb55513D2c91A6e3c497621644ec99e206CDaf239

USDT (TRC20)
TYdPNrz7v1P9riWBWZ317oBgJueheGjATm

0 1 2 3 4 5

| Print version |

	Information
		Users of GUESTS are not allowed to comment this publication.