Umts Rrm State
Date: 29 December 2022 | Posted by: mitsumi
Umts Rrm State
Last updated 8/2020
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 491.20 MB | Duration: 1h 10m
UMTS RRM Concepts
Last updated 8/2020
MP4 | Video: h264, 1280x720 | Audio: AAC, 44.1 KHz
Language: English | Size: 491.20 MB | Duration: 1h 10m
UMTS RRM Concepts
What you'll learn
Cell Search Procedure
PLMN Search, PLMN Selection & Cell Selection
Cell Selection (S Criteria) & Reselection Criteria (R criteria)
Location Registeration
RRC States, Periodic registeration,
IMSI Attach/ Detach
Cell Reselection with HCS
Paging in idle mode, Paging Occasions, Dedicated Paging
System Information Blocks in UMTS
Requirements
It would be recommended that the participant has attended UMTS Air Interface Course.
Understanding of 3G technology
Description
This course provides a learning path to understand the Radio Resource Management (RRM) functions in UMTS. RRM in UTRAN provides a means to manage (e.g., assign, reassign, and release) radio resources in single and multi-cell environments. Our main focus will be to understand the cell procedures which involves comprehending what actually happens when a User Equipment (UE) is switched on. Cell search Process : UE shall make measurements on all the frequency bands, synchronisation with the network follows, and Scrambling code selection process. Successful execution of the cell search and selection procedure as well as acquiring initial system information is essential for the UE before taking further steps to communicate with the network.PLMN Selection and Cell selection Process - Which involves selection of th PLMN and Cell selection using S- Criteria.Understanding the RRC states in UMTS - 3GPP has designed RRC to function in different modes: Idle and Connected. The connected mode is further categorized into four states: Cell-DCH, Cell-FACH, Cell-PCH and URA-PCH.Understanding the paging process in idle as well as connected mode : There are two kinds of paging messages in UMTS, Paging Type 1 and Paging type 2. Paging Type 1. This message will be sent to the UE, when UE is either in Idle State, Cell PCH State or URA PCH State.
Overview
Section 1: Overview
Lecture 1 Course Preview
Lecture 2 Overview & Objectives
Lecture 3 Cell Procedure
Lecture 4 PLMN Search
Lecture 5 PLMN Selection
Lecture 6 Cell Selection & Procedure
Lecture 7 Cell Selection Process
Lecture 8 Cell Selectioin Criterion S ( in the FDD Mode )
Lecture 9 Cell Selection When Leaving the RRC Connected Mode
Section 2: Basics
Lecture 10 Location Registration
Lecture 11 Cell Reselection in the RRC Idle and RRC Connected Mode
Lecture 12 Normal Location Update Procedure LUP
Lecture 13 Periodic Registration
Lecture 14 IMSI Attach/Detach
Lecture 15 RRC Model Diagram
Lecture 16 Hierarchical Cell Structures HCS
Lecture 17 Cell Reselection Without HCS
Lecture 18 Cell Reselection : Measurement Rules
Section 3: Intermediate
Lecture 19 Cell Reselection (W/O HCS) : R-Criterion
Lecture 20 Cell Reselection With HCS
Lecture 21 Cell Reselection With HCS : Measurement Rules
Lecture 22 Measurement Rules : HCS & Fast Moving UE's
Lecture 23 Cell Reselection : H-Criterion (Slow Moving UE)
Lecture 24 Cell Reselection With HCS : R-Criterion and TOn
Lecture 25 Paging
Lecture 26 Paging in Idle Mode
Lecture 27 Paging in Idle Mode and URA PCH
Section 4: Advanced
Lecture 28 Paging Occasions
Lecture 29 Dedicated Paging
Lecture 30 System Information
Lecture 31 System Information Block
Lecture 32 System Information Block 1 (SIB 1)
Lecture 33 System Information Block 6 (SIB 6)
Lecture 34 Cell Update
Lecture 35 URA Update
RF Engineers, UMTS Planners and Optimizers, Drive Test Engineers
Download link
rapidgator.net:
uploadgig.com:
nitroflare.com:
See full article